Tag

JUNO XP Archives - Surface Tech

JUNO XP — an “insurance policy” for Ultra-High Performance Concrete

By | Concrete | No Comments

Ultra-High Performance Concrete (UHPC) as defined by the American Concrete Institute (ACI) Concrete Terminology and ACI 239 stipulate calls for meeting a compressive strength between 17,000 psi up to 22,000 psi with specified durability, toughness and tensile requirements provided by the inclusion of fibers. However, because of it’s the materials employed high strength, UHPC can be difficult to create and can become brittle and prone to cracking.

Fortunately, recent UHPC testing and real-world applications by Surface Tech are demonstrating that JUNO XP, the company’s proprietary alternative supplementary cementitious material (ASCM), can provide an “insurance policy” against UHPC brittleness and sub-sequent cracking.

“UHPC has so much cement in it you have to go with a low water mix, and that’s where you run into the possibility of cracking at both early and later stages of the concrete,” said Jon Belkowitz, PhD, Surface Tech’s chief technology officer.

JUNO XP has a mechanical impact on fresh concrete that allows for a reduction of cementitious material, while still maintaining the cream needed to allow grey concrete to flow easily into the formwork. Moreover, JUNO XP has also proven it can increase strength and durability.

“It makes UHPC stronger, tougher and last longer at no additional cost,” said Belkowitz, who added the product is showing spectacular results in current UHPC application testing by one of the nation’s premier concrete precasters.

“JUNO XP is decreasing the binder content by 15 to 25 percent without sacrificing fresh or hardened properties.”

Those who specify and work with UPHC should welcome these results and the fact that JUNO XP is easily adoptable and improves standard, higher performance concrete mixes, in addition to UHPC.

“JUNO XP can be considered a ‘toughening agent’ for UHPC,” said Belkowitz, “meaning it can increase the strain on the concrete before failure, or increase the energy under stress. This positively affects the strain curve as opposed to other supplementary materials, which tends to make the concrete more brittle at high strengths.”

As numerous tests and real-world applications continue to demonstrate that JUNO XP delivers a revolutionary advancement in concrete solutions, it leads Belkowitz to issue his best advice:  “Start using Juno XP today! It’s flipping awesome!”

JUNO XP

ASCM — an acronym for the future of concrete

By | Case Study - Concrete, Concrete | No Comments

JUNO XP

Acronyms. They’re everywhere. Each industry has plenty, and even our text language is well populated with LOL, OMG and a long list of others. So you may groan a bit when you see a new one, but ASCM for the concrete industry is one you’ll definitely want to know and remember.

Alternative supplementary cementitious materials (ASCM) are making waves within the industry, and for good reasons. One, they can partially replace traditional cement in a wide range of concrete mixes. This is good news for the environment, because the production of traditional cement requires enormous amounts of energy and releases CO2 into the air.

JUNO XPTwo, ASCMs have the capability to deliver important improvements to concrete mixtures. They can increase strength and lifespan, improve workability in placement and require less water, while still delivering the creaminess required for most concrete mixes.

Third, to the delight of many, ASCMs can reduce the cost of concrete. And when you combine the cost savings benefit with added strength that provides improved resistance to abrasion, salts and acidic environments, it’s no wonder attention to ASCMs has grown over the past few years.

ASCMS such as silica and fly ash have been around for a while. But these materials do not address all of the shortcomings of Portland cement in certain applications and environments.

That’s why Surface Tech developed JUNO XP, an advanced mineral admixture that can partially substitute traditional cement. It can be used in standard concretes and in specialty applications without sacrificing performance.

The core technology found in Surface Tech’s JUNO XP is a revolutionary building material using cutting-edge advancements in mineralogy and nanotechnology combined with a graduated fiber matrix to reduce material cost.

Best of all, adding JUNO XP to your mix is easy. You can add it at any point in the production process—at the plant, on the job site, or wherever it fits your need.

So now that you know about ACSM, all you really need to remember is JUNO XP. For more information on how JUNO XP can lower cost and improve performance in projects like soil stabilization, controlled density fill (CDF) and rip-rap, visit https://www.surface-tech.com/portfolio/juno/. To find out how you can achieve savings of up to 30 percent on your next project, contact us.

JUNO XP surpasses major milestone in Stage 4 testing toward achieving 1709 ASTM certification

By | Concrete | No Comments

JUNO XP - alternative supplemental cementious material

For years, contractors have utilized several common types of supplemental cementitious materials (SCM), including fly ash, slag cement, calcined clays, and silica fume to partially replace traditional Portland cement in concrete mixes. The use of these materials has been supported by significant research and testing, as well as long-term performance monitoring.

Now the same rigorous testing procedures are being applied to JUNO XP, Surface Tech’s alternative supplemental cementious material (ASCM), and the reports from Stage 4 testing show JUNO XP produced “fantastic results,” according to Jon Belkowitz, PhD, chief technology officer for cement.

“The 90-day strength test results show JUNO XP is awesome! Throughout the 90-day set of results, the strength and durability of the JUNO XP-enhanced concrete proved out above the 1709 ASTM references.”

The innovative technology behind JUNO XP generates a hardened matrix that increases cementitious efficiency (see Compress Strength graph), and the resistance to physical attack (see Underwater abrasion graph).

Testing on JUNO XP covers a one-year time period, and by achieving excellent results at the 90-day milestone, the product will now enter the field-testing phase.

Standards for the evaluation of materials for 1709 ASTM certification can be found at https://www.astm.org/Standards/C1709.htm

Compress Strength graph

Underwater abrasion graph

JUNO XP alternative supplemental cementitious material (ASCM)

Colorado Ready Mixed Concrete Provider finds JUNO XP weathers Rocky Mountain climate

By | Case Study - Concrete, Concrete | No Comments

JUNO XP alternative supplemental cementitious material (ASCM)For challenging winter weather, look no further than Colorado. During the cold months, concrete pavement must withstand an unending cycle of freeze-thaw and a constant barrage of de-icing salts. When a Colorado-based concrete provider  sought a new solution to this age-old problem, they turned to Surface Tech.

JUNO XP ConcreteWith fly ash in short supply, the concrete provider needed an alternative supplemental cementitious material (ASCM) that would meet ASTM C 672 specifications for a high-end residential driveway. The specs called for a high compressive strength and an ASCM that would ensure a dense hydrated concrete matrix. It was an ideal test for JUNO XP, Surface Tech’s pioneering ASCM product.

Using Surface Tech’s Rapid Deployment technology, JUNO XP was easily added to the mix with no issues or delays in the standard process. Concrete finishers remarked on the ease of finishing despite the reduction in paste content. The mix also retained fresh properties, compressive strength and resiliency when tested from samples fabricated during laboratory and field trials. Best of all, the test delivered significant cost savings without sacrificing fresh or hardened properties. Moreover, a third party testing laboratory confirmed that the JUNO XP concrete maintained the strength and shrinkage required by the engineering specifications.

The concrete provider in Colorado — and others like it across North America — have consistently found that JUNO XP-enhanced concrete will maintain performance, lead to cost savings and create an environment for a greener concrete mix design. Click here to learn more about the revolutionary capabilities of JUNO XP.

Discover Surface Tech at the TRB Annual Meeting at Booth #1133

By | Asphalt, Concrete | No Comments

Innovative products that deliver better, stronger, longer-lasting building materials 

Transportation Research Board (TRB) 98th Annual MeetingIt’s almost here! The Transportation Research Board (TRB) 98th Annual Meeting will convene next week in Washington, DC.  We’ll be there, and we invite everyone to drop by our booth to learn how Surface Tech products can deliver significant benefits to your next concrete or asphalt project.

Our innovative ACE XP polymer fiber solution can make asphalt stronger than steel. JUNO XP, our alternative supplementary cementitious material (ASCM), utilizes cutting-edge advancements in mineralogy and pozzolans to improve the performance of concrete at a microscopic level. Stop by and learn more.

You can also discover more about our products by attending Surface Tech’s TRB Live! Theater. Be sure to mark our presentations on your meeting calendar:

Monday, January 14th – 9:30 a.m.
What is an ASCM and why do we care?
Jon Belkowitz, PhD, Chief Technology Officer, Surface Tech
advanced supplementary cementitious materialPortland cement concrete already incorporates a wide range of supplementary cementitious materials, including fly ash from coal combustion, and silica. However, these materials do not address all of the shortcomings of Portland cement in certain applications and environments. Alternative supplementary cementitious materials hold the promise of increasing the strength of concrete, requiring less water in the mix, improving workability and producing a concrete that’s less brittle. Surface Tech has been at the forefront of alternative binder technology since 2016. Come learn about JUNO XP. We are seeing spectacular potential for this product as an alternative supplementary cementitious material. We’ll explain how it can reduce cost and increase strength of traditional concrete in your next project.

 


Tuesday, January 15th
 12:30 p.m.
The ideal asphalt cracking performance test — what is it?
Joe Dennis, Vice President & Chief Technical Officer, Surface Tech
Phil Blankenship, PE, BLANKENSHIP ASPHALT TECH AND TRAINING, PLLC
ACE XP Polymer FiberASCE recently gave U.S. roadways a dismal “grade D+.” One main reason for this poor performance is the premature cracking of asphalt pavements. This presentation will review a variety of cracking performance tests currently available, providing the strengths and weaknesses of each — including a review of the newest crack performance test called the IDEAL CT crack test. Since the availability of asphalt crack improving modifier options is limited, the presentation will also provide an overview of the capabilities of aramid polymer fibers to decrease this premature cracking of asphalt pavements.

 

Here’s a New Year’s resolution that will pay off BIG for your business

By | Asphalt, Concrete | No Comments

construction with concrete asphalt

As a contractor, you want to provide solutions that will keep your customers coming back. Whether it’s asphalt pavement or a concrete installation, you win when the mix performs well during installation and results in a finished project that clients will appreciate for many years.

Here’s our best advice for 2019:  Resolve to find better, more advanced material solutions that will improve your mix quality, lower your costs, increase ease-of-use and produce a stronger end result that will serve your customers so well that they’ll turn to you again and again — and also recommend you to others.

At Surface Tech, we focus solely on researching and developing the material technologies that enable contractors to deliver asphalt and concrete solutions that can stand the test of time. Naturally, we have two suggested products that will allow you to keep your new year’s resolution.

With ACE XP polymer fiber, contractors can promise — and deliver — asphalt that’s stronger than steel. Unlike other fiber reinforcement products, ACE XP utilizes aramid fibers that provide 400,000 psi tensile strength and micro roots that spread tenaciously throughout the bitumen of the asphalt. The result is a surface that resists rutting and cracking in all kinds of weather and under bruising traffic conditions.

JUNO XP is a revolutionary alternative supplementary cementitious material (ASCM); a new technology that delivers outstanding cost savings without sacrificing performance in standard concrete mix designs. As a partial substitute for traditional concrete binders, this advanced material increases the strength-bearing microstructure of concrete to achieve outstanding toughness and durability.

If you want to know more about the revolutionary material advancements provided by ACE XP and JUNO XP, contact us today. It could result in the best New Year’s resolution you will make for your business— and your customers.

What is an ASCM and Why Do We Care?

By | Concrete | No Comments

Chief Technical Officer Jon Belkowitz, PhD to present at Concrete Expo in 2019

Jon Belkowitz, PhDSurface Tech’s Chief Technical Officer Jon Belkowitz, PhD, will present an overview of Alternative Supplementary Cementitious Materials (ASCM) at Concrete Expo on Jan. 31, 2019 in South Bend, IN. He will provide an overview of ASCM, including how these materials manipulate the microstructure of concrete. Belkowitz has conducted extensive research into ASCM, and part of his presentation will review ongoing concrete research projects.

Interest in ASCM has grown in recent years as supplies of fly ash have decreased. Many producers have also begun to seek out alternatives to these materials in a quest to improve mix workability and hardening properties. Add to these motivations an overall growing concern for the environmental impacts of traditional cement production, and you begin to see why producers are looking for reliable alternative cementitious materials.

At his presentation, you will learn how ASCM-enhanced concrete performs in both workability and hardening stages, as well as the means and methods of employing these products in concrete manufacturing. His presentation will also detail how ASCM can produce civil infrastructure that is both stronger and last longer.

Learn more about the ASCM offered by Surface Tech.

 

Searching for an easy way to reduce traditional cement in your concrete mixes? Look to JUNO XP

By | Concrete | No Comments

JUNO XP - alternative supplementary cementitous product

Lower cost. Environmentally friendly. Higher performance.

These are just a few of the benefits JUNO XP can deliver. But most contractors also want a replacement product that’s easy to adopt, and equally important, produces a concrete that performs well and can withstand the test of time. On all fronts, JUNO XP delivers.

JUNO XP acts as an alternative supplementary cementitious material (ASCM) that reduces the need for traditional cement. Because JUNO XP is a powder, it can be easily incorporated into any conventional dispersion system — silo, hopper, supersacks, bags and dissolvable bags. Integration ease is what separates JUNO XP from other new technologies.

It can also save you money. Contractors can expect to see a reduction of 20 to 35 percent of the cost of conventional cement by adding JUNO XP to the mix. Savings and ease of use alone make JUNO XP a preferred alternative supplementary cementitous product.

Yet JUNO XP goes further by providing key environmental benefits. Since traditional cement production accounts for 88% of the emissions associated with the average concrete mix, JUNO XP provides a way to offset this pollution and provides a means to achieve LEED credits and an improved carbon footprint for your project. Reduction of cement in mix designs is a calculable formula recognized by ACI/ASTM for credits.

Best of all, the ease of use—plus the dollar and environmental savings—come with no sacrifice in performance. The proprietary and novel properties of JUNO XP change cement hydration at the molecular level to increase the strength (tensile and compressive) and the durability of concrete. And it improves the performance of concrete on other levels, including workability and shrinkage control.

JUNO XP has passed Stage 1 and 2 testing to achieve ASTM C1709 certification with impressive results, with final Stage 3 testing on the near horizon. Key early adopters are lab and field testing and piloting the product in various mix designs throughout the U.S. and Canada and report stellar results.

To take advantage of the cost savings, environmental benefits and higher performance offered by JUNO XP — plus learn more about its ease of adoption — contact us.